View ELAC-4GT1-LMPA-5060-XR_6671279.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 introduction the everlight action series ac led embraces the simple electrical concepts of a bridge rectifier. this allows the action to operate easily with an ac source without needing many additional ics, which reduce reliability and increase cost to a system. the action demonstrates useable, high light output efficiency from a direct ac source and allows for unique lighting fixture designs. the act ions thermal management, efficiency, and energy savings performance exceeds that of other power led solutions by incorporating green, state of the art design and efficient thermal emission material. it is an ideal light source for many simple general illumination applications. features applications u direct ac power operation u high efficiency u energy savings u low thermal resistance u long life time u smt solderability u lead free u rohs compliant u general lighting u decorative lighting u task lighting u household lighting u architectural lighting u pathway lighting product specification (preliminary) everlight ac tion ac led series take action with the everlight action for your ligh ting applications
2 mechanical dimension for elac-1xxx 1w 100/110vac note 1. dimensions are in millimeters. 2. tolerances unless mentioned are 0.25mm. 3. do not handle the device by the lens. incorrect force applied to the lens may lead to the failure of devices. 4. the thermal pad is electrically isolated from th e anode and cathode contact pads.
3 mechanical dimension for elac-4xx1 4w 100/110vac note 1. dimensions are in millimeters. 2. tolerances unless mentioned are 0.25mm. 3. do not handle the device by the lens. incorrect force applied to the lens may lead to the failure of devices. 4. the thermal pad is electrically isolated from th e anode and cathode contact pads.
4 mechanical dimension for elac-4xx2 4w 220/230vac note 5. dimensions are in millimeters. 6. tolerances unless mentioned are 0.25mm. 7. do not handle the device by the lens. incorrect force applied to the lens may lead to the failure of devices. 8. the thermal pad is electrically isolated from th e anode and cathode contact pads.
5 product nomenclature the product name is designated as below: elac - abcd - efgh - ijkl - mn elac: everlight action series production number a aaaa = power consumption bc aaa = color region d aaaa = voltage source e aaaa = lens type fg aaa = luminous flux range h aaaiii = voltage bin ijkl iici = cie x-y coordinates bin code, or dominant wavele ngth m ilaaa = internal code n iiiaaa = packing type [a] power consumption code power consumption 1 1 w, 8mm diameter lead frame package 2 2 w, 12mm diameter lead frame package (not yet available * ) 4 4 w, 12mm diameter lead frame package [bc] color region c ode color definition gt high efficacy cool white(4745~7050k) lm high efficacy warm white(2580~3710k) -- other colors (not yet available * ) please refer to pages 10-12 for details. [d] voltage source code operating voltage 1 100v/110v 2 220v/230v [e] lens type code lens type l lambertian -- other lenses (not yet available * ) [fg] luminous flux range please refer to page 9 for details. [h] voltage bin code range of divided bins a 1+2+3+4+5+6 b 5+6+7+8+9+10 c 11+12+13+14+15 please refer to page 9 for details. [ijkl] color bin or cct bin please refer to pages 10-12 for details. [m] internal code [n] packing type code packaging type r tape reel b tube - - * please contact sales for more information and sch eduling. for details refer to page 24.
6 absolute maximum ratings parameter symbol series ratings unit operating voltage [1] v opt elac-1xxx 125 v rms elac-4xx1 125 elac-4xx2 265 power dissipation [2] p d elac-1xxx 1.8 w elac-4xxx 6.4 esd resistance - all 2000 v junction temperature t j all 125 operating temperature t opt all -40 ~ +85 storage temperature t stge all -40 ~ +100 soldering temperature t sol all 260 [1] the operating voltage does not indicate the maximu m voltage which customers use. it represents the le ds maximum acceptable input voltage according to the voltage variation in different countries. it is recommended that the te mperature of lead frame should remain below 70c. [2] power dissipation does not include resistor. resist or values listed in the application note.
7 electro-optical characteristics electrical characteristics ( t soldering =25oc ) parameter symbol series min typ. max unit operating current i opt elac-1xxx - 10 - ma [rms] elac-4xx1 - 40 - elac-4xx2 - 20 - operating frequency fq all - 50/60 - hz power dissipation [3] p d elac-1xxx - 0.9 - w elac-4xxx - 3.3 - [3] power dissipation does not include resistor. resist or values listed in the application note. optical characteristics ( t soldering =25oc ) elac 1w series parameter symbol series min typ. max unit brightness [4] v elac-1gtx - 55 - lm elac-1lmx 45 cri r a elac-1gtx - 75 - - elac-1lmx - 80 - view angle [5] deg. all - 130 - deg. elac 4w series parameter symbol series min typ. max unit brightness [4] v elac-4gtx - 220 - lm elac-4lmx 160 cri r a elac-4gtx - 75 - - elac-4lmx - 80 - view angle [5] deg. all - 130 - deg. [4] luminous flux measurement tolerance: 10%. [5] view angle tolerance is 10.
8 current available part numbers elac 1w series part number operating voltage luminous flux correlated color temperature voltage bin elac-1gt1-lfga-5060-xx 100/110 vac 48-100lm cool wh ite 5000-6020k 80-92 v elac-1gt1-lfgb-5060-xx 100/110 vac 48-100lm cool wh ite 5000-6020k 88-100v elac-1lm1-lefa-2832-xx 100/110 vac 33-69lm warm whi te 2870-3220k 80-92 v elac-1lm1-lefb-2832-xx 100/110 vac 33-69lm warm whi te 2870-3220k 88-100v please refer to page 9-12 in details. elac 4w series part number operating voltage luminous flux correlated color temperature voltage bin elac-4gt1-lmpa-5060-xx 100/110 vac 180-255lm cool w hite 5000-6020k 80-92 v elac-4gt1-lmpb-5060-xx 100/110 vac 180-255lm cool w hite 5000-6020k 88-100v elac-4gt2-lmpc-5060-xx 220/230 vac 180-255lm cool white 5000-6020k 175-200 v elac-4lm1-ljla-2832-xx 100/110 vac 130-180lm warm w hite 2870-3220k 80-92 v elac-4lm1-ljlb-2832-xx 100/110 vac 130-180lm warm w hite 2870-3220k 88-100v elac-4lm2- ljlc-2832-xx 220/230 vac 130-180lm warm white 2870-3220k 175-200v please refer to page 9-12 in details.
9 luminous flux binning code [6] [7] divided bin luminous flux [6] [7] e 33-48 f 48-69 g 69-100 h 100-130 j 130-150 k 150-165 l 165-180 m 180-200 n 200-225 p 225-255 q 255-290 r 290-330 [6] luminous flux measurement tolerance: 10%. divided bins will be marked on packaging. [7] for bin code selection, specify the minimum and max imum divided bin in part number. bin code selection restricted to a typical of 2 div ided bins. voltage binning [8] voltage bin code code group of divided bins a 1+2+3+4+5+6 b 5+6+7+8+9+10 c 11+12+13+14+15 range of the divided bins rank minimum voltage (vrms) maximum voltage (vrms) 1 80.0 82.0 2 82.0 84.0 3 84.0 86.0 4 86.0 88.0 5 88.0 90.0 6 90.0 92.0 7 92.0 94.0 8 94.0 96.0 9 96.0 98.0 10 98.0 100.0 11 175.0 180.0 12 180.0 185.0 13 185.0 190.0 14 190.0 195.0 15 195.0 200.0 [8] forward voltage measurement tolerance: 1v. rank wi ll be marked on packaging.
10 warm -white bin coordi nates [9] bin code reference range 2528 2580k ~ 2870k 2832 2870k ~ 3220k 3237 3220k ~ 3710k bin code divided bin cie x cie y divided bin cie x cie y 2528 27-1 0.469 0.429 27-3 0.447 0.408 0.459 0.410 0.437 0.389 0.470 0.413 0.448 0.392 0.481 0.432 0.459 0.410 27-2 0.456 0.426 27-4 0.459 0.410 0.447 0.408 0.448 0.392 0.459 0.410 0.459 0.394 0.469 0.429 0.470 0.413 2832 30-1 0.443 0.421 30-3 0.422 0.399 0.435 0.403 0.415 0.381 0.447 0.408 0.426 0.385 0.456 0.426 0.435 0.403 30-2 0.430 0.417 30-4 0.435 0.403 0.422 0.399 0.426 0.385 0.435 0.403 0.437 0.389 0.443 0.421 0.447 0.408 3237 35-1 0.415 0.409 35-3 0.394 0.385 0.408 0.392 0.389 0.369 0.422 0.399 0.402 0.375 0.430 0.417 0.408 0.392 35-2 0.400 0.402 35-4 0.408 0.392 0.394 0.385 0.402 0.375 0.408 0.392 0.415 0.381 0.415 0.409 0.422 0.399 [9] color coordinates measurement tolerance: 5%
11 cool -white bin coordi nates [9] bin code reference range 4757 4745k ~ 5700 k 5060 5000k ~ 6020k 5365 5310k ~ 6500k 5770 5700k ~ 7050k bin code divided bin cie x cie y divided bin cie x cie y 4757 50-1 0.346 0.369 50-3 0.337 0.349 0.345 0.356 0.337 0.337 0.353 0.362 0.344 0.343 0.355 0.376 0.345 0.356 50-2 0.338 0.362 50-4 0.345 0.356 0.337 0.349 0.344 0.343 0.345 0.356 0.352 0.349 0.346 0.369 0.353 0.362 57-1 0.329 0.354 57-4 0.329 0.342 0.329 0.342 0.329 0.331 0.337 0.349 0.337 0.337 0.338 0.362 0.337 0.349 5060 50-2 0.338 0.362 50-3 0.337 0.349 0.337 0.349 0.337 0.337 0.345 0.356 0.344 0.343 0.346 0.369 0.345 0.356 57-1 0.329 0.354 57-3 0.321 0.335 0.329 0.342 0.322 0.324 0.337 0.349 0.329 0.331 0.338 0.362 0.329 0.342 57-2 0.321 0.346 57-4 0.329 0.342 0.321 0.335 0.329 0.331 0.329 0.342 0.337 0.337 0.329 0.354 0.337 0.349
12 group divided bin cie x cie y divided bin cie x cie y 5365 57-1 0.329 0.354 57-3 0.321 0.335 0.329 0.342 0.322 0.324 0.337 0.349 0.329 0.331 0.338 0.362 0.329 0.342 57-2 0.321 0.346 57-4 0.329 0.342 0.321 0.335 0.329 0.331 0.329 0.342 0.337 0.337 0.329 0.354 0.337 0.349 65-1 0.312 0.339 65-4 0.313 0.329 0.313 0.329 0.314 0.319 0.321 0.337 0.322 0.326 0.321 0.348 0.321 0.337 5770 57-2 0.321 0.346 57-3 0.321 0.335 0.321 0.335 0.322 0.324 0.329 0.342 0.329 0.331 0.329 0.354 0.329 0.342 65-1 0.312 0.339 65-3 0.305 0.321 0.313 0.329 0.307 0.311 0.321 0.337 0.314 0.319 0.321 0.348 0.313 0.329 65-2 0.303 0.330 65-4 0.313 0.329 0.305 0.321 0.314 0.319 0.313 0.329 0.322 0.326 0.312 0.339 0.321 0.337 [9] color coordinates measurement tolerance: 5%
13 reflow soldering characteristics - all parameters are maximum body case temperature values and cannot be considered as a soldering pro file. the body case temperature was measured by soldering a thermal cou ple to the soldering point of leds. preheat temperature min. (t smin ) 150 c temperature max. (t smax ) 200c time (t smin to t smax ) (t s ) 60-120 seconds average ramp-up rate (t smax to t p ) 3 c/second max other liquids temperature (t l ) 217 c time above liquids temperature (t l ) 60-150 sec peak temperature (t p ) 260c time within 5 c of actual peak temperature: t p - 5c 10 s ramp- down rate from peak temperature 6c /second max. time 25c to peak temperature 8 minutes max. reflow times 2 times reference: ipc/jedec j-std-020d
14 typical wavelength characteristics 1. cool-white (thermal pad temperature = 25 ) 400 500 600 700 0.0 0.2 0.4 0.6 0.8 1.0 relative spectral distribution wavelenght(nm) 2. warm-white (thermal pad temperature = 25 ) 400 500 600 700 0.0 0.2 0.4 0.6 0.8 1.0 relative spectral distribution wavelenght(nm)
15 typical flux- thermal pad temperature characteristics

! " # $ %& # ' ( #) * + # + , typical current - voltage characteristics -

- - . . -

/ 0 1 2 3 4 5 6 / 7 8 # 99 % * : ; < $ =,
16 typical relative lumi nous flux vs. voltage > ? > > ? @ a ? > a ? @ b ? > b ? @ c ? > d > e > f > a > > a a > a b > a c > g h i j k lm n o p q r g s t u v w x y z u [ \ ] y ^_ \ ` av \b c w d \ d e typical radiation patterns 0 20 40 60 80 100 120 140 160 180 0.0 0.2 0.4 0.6 0.8 1.0 relative intensity distribution degree [deg.] note 1. 2 1/2 is the off axis angle from lamp centerline where th e luminous intensity is 1/2 of the peak value. 2. viewing angle tolerance is 10 f . -90 -60 -30 0 30 60 90
17 application note 1. operating circuit 2. recommended resistor i. everlight action must be used with a resistor. ii. the tolerance of current is 5% on each resista nce rank. iii. resistor table: elac 1w (elac-1xxx) series, 100/110vac - driven at 10ma [rms] voltage bin minimum voltage(vrms) maximum voltage(vrms) recommended resistor 100v 110v 1 80.0 82.0 2.20k? 3.20k? 2 82.0 84.0 2.00k? 3.00k? 3 84.0 86.0 1.80k? 2.80k? 4 86.0 88.0 1.60k? 2.60k? 5 88.0 90.0 1.40k? 2.40k? 6 90.0 92.0 1.20k? 2.20k? 7 92.0 94.0 1.00k? 2.00k? 8 94.0 96.0 800? 1.80k? 9 96.0 98.0 600? 1.60k? 10 98.0 100.0 400? 1.40k? resistor ac
18 elac 4w (elac-4xx1) series, 100/110vac voltage bin minimum voltage(vrms) maximum voltage(vrms) recommended resistor 100v 110v 1 80.0 82.0 550? 800? 2 82.0 84.0 500? 750? 3 84.0 86.0 450? 700? 4 86.0 88.0 400? 650? 5 88.0 90.0 350? 600? 6 90.0 92.0 300? 550? 7 92.0 94.0 250? 500? 8 94.0 96.0 200? 450? 9 96.0 98.0 150? 400? 10 98.0 100.0 50? 350? -driven at 40ma [rms] elac 4w (elac-4xx2) series, 220/230vac voltage bin minimum voltage(vrms) maximum voltage(vrms) recommended resistor 220v 230v 1 175.0 180.0 2.00k? 2.50k? 2 180.0 185.0 1.75k? 2.25k? 3 185.0 190.0 1.50k? 2.00k? 4 190.0 195.0 1.25k? 1.75k? 5 195.0 200.0 1.00k? 1.50k? -driven at 20ma [rms]
19 3. thermal management i. for maintaining the high flux output and achievi ng reliability, everlight ac led series led package should be mounted on a metal core printed c ircuit board (mcpcb) or aluminum heat sink with proper thermal connection to dissipate ap proximately 4w of thermal energy under 100/110v and 220/230v operation. ii. special thermal designs are also recommended to take in outer heat sink design, such as fr4 pcb on aluminum with thermal vias or fpc on aluminu m with thermal conductive adhesive, etc. iii. under extreme driving conditions, sufficient t hermal management must be implemented or the die junction temperature may exceed the limit and t he led lifetime will decrease rapidly. iv. it is recommended that the temperature of the h eat sink should be below 70c. heat sink mcpcb structure recommended supplier g kavano industrial co., ltd g tt electronics
20 4. proper handling to avoid contamination of materials, damage of inte rnal components, and shortening of led lifetime, do not subject leds to conditions as thos e listed below. bare hand t weezers when handling the product, do not apply direct pressure on the resin. do not touch the resin to avoid scratching or other damage. pick and place nozzle for surface mount assembly. during module assembly avoid directly contacting with nozzle. do not stack the modules together, it could damage the resin or scratch the lens.
21 emitter tube packaging for elac-1w series only. 1. tube 2. inner carton 3. outside carton l packing quantity 1. 50 pcs / tube 2. 20 tubes / inner carton 3. 12 inner cartons / outside carton 4. minimum order quantity: 100 pcs
22 emitter tape packaging for elac-2w, 4w series. packing quantity 1. 400pcs / one reel 2. dimensions are in millimeters 3. the tolerances unless mentioned is 0.1mm 4. minimum order quantity: 100 pcs moisture resistant packaging aluminum moistue-proof bag label desiccant label label aluminum moisture-proof bag desiccant label feed direction
23 emitter reel packaging note 1. dimensions are in millimeters 2. the tolerances unless mentioned is 0.1mm product labeling label explanation cpn: customer specification (when required) p/n : everlight production number qty: packing quantity lot no: lot number cat: rank of luminous flux hue: color rank ref: rank of operating voltage made in taiwan: production place 3 2 35 elac-abcd-efgh-ijkl-mn xxx - xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
24 msl: moisture sensitive level * full explanation of p/n and bin code is described in product nomenclature section
25 global network korea everlight optoelectronics kroea co., ltd. #302, yoksamdong 720-2, kangnamku, seoul, korea tel: +82-2-562-8088 fax: +82-2-562-6588 email: danieljo@everlight.com malaysia everlight optoelectronics (m) sdn bhd b-04-20 krystal point, 303 jalan sultan azlan shah, 11900 penang, malaysia tel: +60-4-6464233 fax: +60-4-6465233 email: inquiry@everlight-pg.com.my japan e&e japan co., ltd. kindaikagakysha 7f, 2-7-15, ichigayatamachi, shinjuku-ku, tokyo, 162-0843, japan tel: +81-(0)3-3267-6761 fax: +81-(0)3-5225-6771 email: eejp@eejp.co.jp www.eejp.co.jp america california usa everlight americas inc. 325 piercy road san jose, ca 95138, usa tel: +1-408-225-7800 fax: +1-408-225-7800 email: salesmkt@everlight.com www.everlightamericas.com texas usa everlight americas inc. 3220 commander dr. suite 100 carrollton, texas, 75006, united states tel: +1-972-490-4008 fax: +1-972-490-5009 email: salesmkt@everlight.com everlightinternational.com canada everlight canada 4145 north service rd., suite 200 burlington, on canada l7l 6a3 tel: +1-905-315-5050 fax: +1-905-336-0040 email: everligtcanada@everlightinternatinal.com europe germany everlight electronics europe gmbh breite str. 155, 76135 karlsruhe germany tel: +49-721-824-473 fax: +49-721-824-4740 email: info@everlight-eu.de nordic everlight electronics europe gmbh isafjordsgatan 22, 164 40 kista, sweden tel: +46-8375617-8 email: nordic@everlight-eu.de plants asia taiwan taichung everlight electronics co., ltd. h i j k l m n o p q r st u v w xyz no. 35, lane guoguang, 6th neighborhood yutian village, yuanli township, miaoli county 35874, taiwan tel: 886-37-741000 fax: 886-37-740776 email: marketing@everlight.com, tainan everlight electronics co., ltd. h i h { | } ~ ? ? ? x?yz?? ? s room 6, 8f, 395, sec. 1, linseng rd., east district, tainan 701, taiwan tel: +886-6-235-8282 fax: +886-6-235-9292 email: robertchen@everlight.com china hong kong evlite electronics co., ltd. ? ? ? ???? sz ? ? ? ? ? s?s?? ? units 1606-1608, 16/f, modern warehouse, 6 shing yip street, kwun tong, kowloon, hong kong tel: +852-23880602 fax: +852-23881127, 23843092 email: hkcm@everlight.com guangzhou everlight electronics (bvi) co., ltd ? u ?}?? ? | ? ?~ ?? ? ? ? ? ? ?? ?? ? ?? ? ?y? ?? 205 2f, business building shatou, east yushan rd., panyu town, guangzhou, prc, china postcode: 511490 tel: +86-(0)20-84663392 fax: +86-(0)20-84663372 email: chcm@everlight.com suzhou everlight electronics (china) co., ltd ? u ? ? | | ~ ? ? x??z ? a ?? x ? ?s ? ? ? binhe rd. 1388, x2 creative block a-608, suzhou city, jiangsu province, prc, china postcode: 215011 tel: +86-(0)512-68021303 68631358 fax: +86-(0)-512-68021302 68631348 email: chsha@everlight.com tianjin everlight electronics (bvi) co., ltd ? u - ? | ? ~? ? ? ??z ? 2 3 ? ?? ? no. 2109, vanke center building, no. 290, zhongshan rd., hebei district, tianjin, china postcode: 300141 tel: +86-22-26351122, 26351133 email: chsha@everlight.com taiwan taipei everlight electronics co., ltd. h i h ?l | ? ?? ? ?s w yz everlight electronics co., ltd 25, lane 76, sec 3, chung yang rd tucheng, taipei 23671, taiwan tel: +886-2-22672000 fax: +886-2-22698197 yuan-li everlight electronics co., ltd. h i j k l m n o p q r st u v w xyz no. 35, lane guoguang, 6th neighborhood yutian village, yuanli township, miaoli county 35874, taiwan tel: 886-37-741000 fax: 886-37-740776 china guangzhou everlight electronics (bvi) co., ltd ? u ?}?? ?~ 1o ? ? ? ? ? ~ ? ? ? 7c, b/5, building, lian hua shan port industry district pan yu, guang zhou, china tel: +86-20-84865918, 84860913 fax: +86-20-84860600 suzhou everlight electronics (china) co., ltd ? u ? ? | oa? ? ? ~ ? ?? ~ ? ? ? ? ? xyz ? 2135, zhong shan n. rd, wujiang economy development zone songling town, wujiang city, jiang su, prc, china tel: +86-512-63409123 fax: +86-512-63409162 taiwan headquarters no.25, lane 76, sec. 3 , chung yang rd., tucheng 23 6, taipei, taiwan 23671 ? ?e ? ? ? ? ? 76 25 tel : +886-2-2267-2000 fax : +886-2-2267-6244 22 67-6189 www.everlight.com
26 revision history current version: 2010/01/21 previous version: 2.0 device no. preliminary rev.1.0 page subjects (major change in previous version) date of change

▲Up To Search▲

Price & Availability of ELAC-4GT1-LMPA-5060-XR

	To Download ELAC-4GT1-LMPA-5060-XR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .